3.5 Inch CCTV Tester with Signal Generator, LAN tester, DMM

Out of stock
SKU
CCM-005
€412.05 €335.00

A Fully Featured CCTV Tester with a very clear 3.5 inch screen, making it very easy to focus and adjust cameras. This CCTV Tester makes installing cameras and finding faults so easy. It can control PTZ cameras, Send a colour bar picture, test for dodgy network cables, and has an excellent digital multi-meter built-in, so no need for a seperate DMM, it's so handy when you're on top of a ladder and you need to see if there is power. This meter will also power any 12V DC camera, using the supplied cable. It's perfect for troubleshooting faulty cameras, is it the cable? power supply? camera? quickly find out. It also has a very rugged removable rubber non-slip casing.

UPDATE: NOW COMES WITH SD CARD VERSION THAT LETS YOU TAKE SNAPSHOTS AND VIDEO OF CAMERA. ALSO HAS ZOOM FOR EASIER AND MORE ACCURATE FOCUSING.

New version also has:

Ethernet port Flicker

PoE voltage tester

Video Level Meter

IP Address Scanner

IP Address PING

Video Signal Level Tester

LED Torch

3.5 inch screen CCTV Tester with PTZ, multi-meter, LAN tester

Built-in PTZ controller - perfect for testing PTZ cameras

Built-in Colour Bar generator - sends the colour bar down COAX cable

Built-in PTZ analyser - not sure what address or baud rate? This meter finds it for you

Built-in LAN cable tester - Lets you know if cables are twisted or broken

Digital Multi-meter - measures AC/DC voltages, resistance, sounder etc, very handy

Digital Multi-meter inputs

12V DC output - easily power the camera you're working on, makes installation very easy

3.5 Inch CCTV Tester close up

Built-in Lithium Ion battery, about 12 hours use one charge!

Look!! No Hands!!, well almost, the CCTV Tester is powering up the camera by itself

CCTV Tester powers camera

 

 

Model Number CCTV Tester CCM-005
Signal System NTSC / PAL (Auto-Selecting)
Display 3.5 inch TFT-LCD
Resolution 960 x 240 (H x V)
LCD adjust Adjustable brightness, contrast, color of LCD
Video Input / Output 1 channel BNC input & 1 channel BNC looped output
Video Level Test Video signals measured in IRE or mV
Power Adapter 5V DC, 2A input supply
Power output 12V DC, 1A supply
Audio input 1 channel Audio input
Communication RS232, RS422 simplex and RS485
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps
Power Saving Features Sleep mode, Battery level indicator
PTZ Address Scanning Scan for local PTZ address over data cables
Rechargeable Battery 4 hours charge, work for 12 hours
Battery 1 pcs Lithium Ion Polymer Battery; 3.7V DC, 3000mAh
Video Display Displays video signal from analog input
Video Signal Generation Color bar generator for monitor testing
UTP Cable Test Checks connections of UTP cables
PTZ Protocol Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, TeleEye etc.
PTZ data Capture Reads and displays commands sent from controllers
MultiMeter Voltage, current, resistance and capacitance measuring, continuity testing, diode testing.
Dimension 185mm x 110mm x 40mm
Gross Weight 980g

 

Write Your Own Review
You're reviewing:3.5 Inch CCTV Tester with Signal Generator, LAN tester, DMM
Your Rating
Back to Top

3.5 Inch CCTV Tester with Signal Generator, LAN tester, DMM

€412.05 €335.00